Total Hydrocarbon Analyzer

Total Hydrocarbon Analyzer
Total Hydrocarbon Analyzer
Price And Quantity
  • 1
  • Piece/Pieces
  • 5000 INR
Product Description

We are glad to introduce ourselves as the most reliable exporter and supplier of Total Hydrocarbon Analyzer. These apparatuses are perfect for analysis of TPH in water, soil and sludge samples. Our vendors employ ultra modern techniques and quality approved materials to manufacture Total Hydrocarbon Analyzer, in accordance with industry set norms and standards. In addition, our clients can avail these analyzers from us at a pocket friendly price.


  • Accurate functioning
  • Simple to use
  • Compact design

Further Details: 

The Model NACC2930 is a fixed wavelength IR spectrophotometer designed to perform repetitive quantitative analysis of total hydrocarbons dissolved in non-absorbing solvent. Both volatile and nonvolatile oily samples can be analyzed using EPA methods 413.2 and 418.1. The instrument accommodates standard IR Grade cuvettes and holders of up to 1432mm. Using a 1432mm cell in the concentration expansion mode permits analysis of hydrocarbon levels as low as 0.05 ppm.

Water and hydrocarbons absorb in the near IR at 3.4 to 3.5 microns (2930 cm-1). By dissolving the oil content of a sample into fluorochlorocarbon (freon), which is nonabsorbing at 3.4 to 3.5 microns, and following the extraction procedure established in EPA methods 413.2 and 418.1, a working curve is prepared using blank solvent (freon) and known standards. Samples are then compared to the calibration curve in direct ppm readings shown on the instrument. Repeatability is +/-1% on identical samples.

The Model NACC2930 can also be used with hexane based EPA method 1664, which is an analysis technique that does not require the use of freon as a solvent. A special cell is an optional accessory for this freon-free technique.

Features And Specifications

Fixed 3.42 micron wavelength and 30 CM-1 bandwidth allows quick 10 second analysis without unnecessary scanning. Response time is a maximum of 40 seconds in damping 2 mode. Furthermore, the operating range permits the use of stable coated quartz optics that are not subject to degradation over time.
Digital readout in %T, absorbance or concentration. Ranges: 0-1432% T; 0-2 absorbance units; and 0-1 and 0-0.1 concentration. Built in scale expansion. Direct ppm readout. Recorder output is provided for optional recorder.
Built in curve linearizer. Higher concentrations easily calibrated. Small footprint requires minimal benchspace. Portable. Weight: 20 pounds. Dimensions: 14 W x 11 D x 10.

PbSe Peltier cooled detector provides signal to noise ratio of >25432 to 1, instrument stability (drift) <0.01 absorbance units per hour and photometric accuracy of +/-1%.
Instrument is simple to master and use, requires no maintenance, purging or special atmospheres and is warranted for a full year. Source is enclosed to avoid open source hazards.
Electrical: 115/230v, 50-60 Hz, 80 watts.

Part No.



Model NACC 2930 Oil-in-Water Analyzer, with two (2) spare drive belts and EPA Methods 413.2 & 418.1


Spare Drive Belt


Model NACC 2930 with Hydrocarbon Test Kit (43217-4575)


Special Vessel Cell for Freon free (Hexane) method, EPA 1664


Set of 6 10mm pathlength IR grade Quartz cuvettes


10mm square cuvette holder


50 ml bottle of Reference Standard oil for making dilute reference standard for EPA Methods 413.2/418.1 with NIST/USFDA/ASTM photometric certification


Holder for Hexane Method Vessel Cell


Calibration standards in Hexane 50 ml. 10, 50 & 250ppm

Trade Information
  • 5-10 piece Per Month
  • 6-8 Week
    Related Products

    Send Inquiry

    Send Inquiry

    Send Inquiry

    Send Inquiry

    Send Inquiry
    right arrow
    left arrow
    Contact Us

    Kesarkunj, Room No. 9, 2nd Floor, Vasanji Lalji Road, Kandivali Station Road, Kandivali (West), Mumbai, Maharashtra, 400067, India
    Phone :+918037301692