- 5000 INR
The 210/211 is shipped ready for use. All operating conditions are pre-loaded in the internal computer, including lamp settings, secondary wavelengths, and alternate methods of analysis for over 60 elements by flame, furnace, or hydride techniques. The three lamp turret has individual controls for alignment and standby mode to keep lamps warm. Direct report generation to a printer or data linking to the Free Buck Analyst software package is easily done using the parallel and RS-232 serial ports.
The Buck Accusys 211 is a high energy, microprocessor controlled single beam
atomic absorption spectrophotometer. Solid state electronics and simple optics provide the basis for our superior stability and sensitivity. The Ebert mount monochromator and user-selectable bandwidth give the system maximum flexibility. Our short-path dynamic nebulizer/burner configuration is highly efficient. An inert needle, precisely positioned in a high flow venturi, delivers sample to the corrosion proof impact bead. This results in a tremendously high nebulization effect for all types of sample matrices.
Deuterium Background Correction
This is the oldest and still most commonly used technique, particularly for flame AAS. In this case, a separate source (a deuterium lamp) with broad emission is used to measure the background absorption over the entire width of the exit slit of the spectrometer. In the 210VGP & Accusys 211 the deuterium lamp is in-line with the hollow cathode lamp, thus eliminating the need for a double beam system. The benefits of a single beam system are more energy, smaller size, lower cost, and a more sensitivity.
- Unique non-flame ignitor provides the safest instrument start-up Simple 3 button operation for fully automatic gas controls, ignition and gas switchover (Air to Nitrous Oxide)
- Automatic optimization of analytical parameters when method files are loaded from the 211 built-in Methods Library
- Fully integrated safety interlocks for gas pressure sensors, burner head type, UV flame sensor, drain line trap and ignitor continuity insure safe operation of the 211 AAS Upgradeable to the model 220GF back-mounted graphite furnace for ppb/ ppt trace level analyses
- Available autosampler, hydride generator and cold vapor attachments Internal microprocessor and software can identify samples, perform statistical analysis and graphically display calibration curves and transient peaks (Hydride generation & Graphite furnace)
- 5-10 piece Per Month
- 6-8 Week
Kesarkunj, Room No. 9, 2nd Floor, Vasanji Lalji Road, Kandivali Station Road, Kandivali (West), Mumbai, Maharashtra, 400067, India